How to find out restore progress of the job

Hello,
I was wondering if there is a way to find out restore progress of the
job. If I run restore in QA, I can use STATS option to control restore
progress statistics but this information is not accessible when restore
executed as a part of a job.
Thanks,
Igor
Hi,
You can do it using a batch file and call the batch file inside the SQL
Agent -- Jobs (Command
1. Batch file should be:-
OSQL -Uuser -Ppassword -Sserver -d dbname -Q"backup database pubs to
pubsbak' with init, stats=10 -oc:\backup.log
2. Then schedule the batch using SQL Agent job with type as "Operating
system command".
3. During job you could open the c:\backup.log to get the status
I hope this will work out.. I have not tested this so far Probably you
could test and get back.
Thanks
Hari
SQL Server MVP
"Igor Marchenko" <igormarchenko@.hotmail.com> wrote in message
news:eRAVJRkOFHA.1500@.TK2MSFTNGP09.phx.gbl...
> Hello,
> I was wondering if there is a way to find out restore progress of the
> job. If I run restore in QA, I can use STATS option to control restore
> progress statistics but this information is not accessible when restore
> executed as a part of a job.
>
> Thanks,
> Igor
>
|||It worked nicely. Thanks a lot, Hari! I have found another way. When
scheduling a job in EM, you can specify Output file in Advanced tab of the
task. Stats progress is being logged into this file.
Igor
"Hari Prasad" <hari_prasad_k@.hotmail.com> wrote in message
news:OynaXakOFHA.3880@.tk2msftngp13.phx.gbl...
> Hi,
> You can do it using a batch file and call the batch file inside the SQL
> Agent -- Jobs (Command
> 1. Batch file should be:-
> OSQL -Uuser -Ppassword -Sserver -d dbname -Q"backup database pubs to
> pubsbak' with init, stats=10 -oc:\backup.log
> 2. Then schedule the batch using SQL Agent job with type as "Operating
> system command".
> 3. During job you could open the c:\backup.log to get the status
> I hope this will work out.. I have not tested this so far Probably you
> could test and get back.
> Thanks
> Hari
> SQL Server MVP
>
> "Igor Marchenko" <igormarchenko@.hotmail.com> wrote in message
> news:eRAVJRkOFHA.1500@.TK2MSFTNGP09.phx.gbl...
>

How to find out restore progress of the job

Hello,
I was wondering if there is a way to find out restore progress of the
job. If I run restore in QA, I can use STATS option to control restore
progress statistics but this information is not accessible when restore
executed as a part of a job.
Thanks,
IgorHi,
You can do it using a batch file and call the batch file inside the SQL
Agent -- Jobs (Command
1. Batch file should be:-
OSQL -Uuser -Ppassword -Sserver -d dbname -Q"backup database pubs to
pubsbak' with init, stats=10 -oc:\backup.log
2. Then schedule the batch using SQL Agent job with type as "Operating
system command".
3. During job you could open the c:\backup.log to get the status
I hope this will work out.. I have not tested this so far Probably you
could test and get back.
Thanks
Hari
SQL Server MVP
"Igor Marchenko" <igormarchenko@.hotmail.com> wrote in message
news:eRAVJRkOFHA.1500@.TK2MSFTNGP09.phx.gbl...
> Hello,
> I was wondering if there is a way to find out restore progress of the
> job. If I run restore in QA, I can use STATS option to control restore
> progress statistics but this information is not accessible when restore
> executed as a part of a job.
>
> Thanks,
> Igor
>|||It worked nicely. Thanks a lot, Hari! I have found another way. When
scheduling a job in EM, you can specify Output file in Advanced tab of the
task. Stats progress is being logged into this file.
Igor
"Hari Prasad" <hari_prasad_k@.hotmail.com> wrote in message
news:OynaXakOFHA.3880@.tk2msftngp13.phx.gbl...
> Hi,
> You can do it using a batch file and call the batch file inside the SQL
> Agent -- Jobs (Command
> 1. Batch file should be:-
> OSQL -Uuser -Ppassword -Sserver -d dbname -Q"backup database pubs to
> pubsbak' with init, stats=10 -oc:\backup.log
> 2. Then schedule the batch using SQL Agent job with type as "Operating
> system command".
> 3. During job you could open the c:\backup.log to get the status
> I hope this will work out.. I have not tested this so far Probably you
> could test and get back.
> Thanks
> Hari
> SQL Server MVP
>
> "Igor Marchenko" <igormarchenko@.hotmail.com> wrote in message
> news:eRAVJRkOFHA.1500@.TK2MSFTNGP09.phx.gbl...
>

How to find out restore progress of the job

Hello,
I was wondering if there is a way to find out restore progress of the
job. If I run restore in QA, I can use STATS option to control restore
progress statistics but this information is not accessible when restore
executed as a part of a job.
Thanks,
IgorHi,
You can do it using a batch file and call the batch file inside the SQL
Agent -- Jobs (Command
1. Batch file should be:-
OSQL -Uuser -Ppassword -Sserver -d dbname -Q"backup database pubs to
pubsbak' with init, stats=10 -oc:\backup.log
2. Then schedule the batch using SQL Agent job with type as "Operating
system command".
3. During job you could open the c:\backup.log to get the status
I hope this will work out.. I have not tested this so far :) Probably you
could test and get back.
Thanks
Hari
SQL Server MVP
"Igor Marchenko" <igormarchenko@.hotmail.com> wrote in message
news:eRAVJRkOFHA.1500@.TK2MSFTNGP09.phx.gbl...
> Hello,
> I was wondering if there is a way to find out restore progress of the
> job. If I run restore in QA, I can use STATS option to control restore
> progress statistics but this information is not accessible when restore
> executed as a part of a job.
>
> Thanks,
> Igor
>|||It worked nicely. Thanks a lot, Hari! I have found another way. When
scheduling a job in EM, you can specify Output file in Advanced tab of the
task. Stats progress is being logged into this file.
Igor
"Hari Prasad" <hari_prasad_k@.hotmail.com> wrote in message
news:OynaXakOFHA.3880@.tk2msftngp13.phx.gbl...
> Hi,
> You can do it using a batch file and call the batch file inside the SQL
> Agent -- Jobs (Command
> 1. Batch file should be:-
> OSQL -Uuser -Ppassword -Sserver -d dbname -Q"backup database pubs to
> pubsbak' with init, stats=10 -oc:\backup.log
> 2. Then schedule the batch using SQL Agent job with type as "Operating
> system command".
> 3. During job you could open the c:\backup.log to get the status
> I hope this will work out.. I have not tested this so far :) Probably you
> could test and get back.
> Thanks
> Hari
> SQL Server MVP
>
> "Igor Marchenko" <igormarchenko@.hotmail.com> wrote in message
> news:eRAVJRkOFHA.1500@.TK2MSFTNGP09.phx.gbl...
>> Hello,
>> I was wondering if there is a way to find out restore progress of the
>> job. If I run restore in QA, I can use STATS option to control restore
>> progress statistics but this information is not accessible when restore
>> executed as a part of a job.
>>
>> Thanks,
>> Igor
>

How to filter sqldatasource

Hi,

I am new in framework 2 and I can't find a way to filter the sqldatasource.

I have an sqldatasource control that retrive data from data base-"Select * from myTable"

I set the fiterExpression property-sqlDataSource1.FilterExpression="ID='" + strID + "' " ;

I don't know how to continue from here.If I bound the sqlDataSource1 to a control like gridView it works good and I see the filter oparation. but I want to get the result set in the code and loop threw it like I did with ver 1.1 with sqldataReader:

While sqlDatareader1.Read { myCode ... }

How can I do it with sqlDataSource ?

Thanks,

David

I copied my answer for this question:

If your DataSourceMode of your SQLDataSource stays as default which is DataSet, you can retrieve a dataview object of your SQLDataSource. If DataSourceMode="DataReader" in yourSQLDataSource, you can retrieve a datareader object.

Here is the an sample for dataview:

Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load

'DataView
Dim mydataview As System.Data.DataView =CType(SQLDataSource1.Select(DataSourceSelectArguments.Empty), System.Data.DataView)

For Each dr As DataRow In dv.Table.Rows
...

Next

'For a Datareader

Dim myreader as System.Data.SqlClient.SqlDataReader = CType(SqlDataSource1.Select(DataSourceSelectArguments.Empty), System.Data.SqlClient.SqlDataReader)

While myreader.reader

...

End While

You can use parameterized query for your datasource's sql selection statement.

For example:(DDL1 ia a dropdownlist)

<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Personal %>"
SelectCommand="SELECT [mycol1], [mycol2], [mycol3], [myDate], [firstName] FROM [Table1] WHERE ([firstName=@.firstName)">
<SelectParameters>
<asp:ControlParameter ControlID="DDL1" Name="firstName" PropertyName="SelectedValue"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>

HTH.

|||hi david,
I think a much simpler way to handle code-behind data operations would be to use the current version of the Data Access Application Block in the Enterprise Library, available at http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnpag2/html/entlib2.asp

IMHO, it's much simpler for the kind of while datareader.read and the stuff we used to do in 1.1. The download comes with quite comprehensive documentation, give it a try.

fendi,|||

Hi Limno,

Thanks for your helpful answer. Now I understand sqlDataSource better.

Have a good week.

David.

|||

Hi fendi,

Thanks for your advice.I'll keep it .

Have a good week.

David